Dự án thực hiện

Hỗ trợ trực tuyến


Liên kết website

Số lượng truy cập

Đang trực tuyến 9 người
san pham
» IDROGO Series
» Chi tiết sản phẩm :
in AISI 304
AISI 304 5” submersed multistage centrifugal electric pumps.

• Moving clear water from wells, cisterns and primary collection reservoirs
• Pressure boosting domestic plants • Small-sale irrigation • Washing vehicles • General pressure increases

• Equipped with twin mechanical seal with interposed oil chamber • Supplied with 20 m of H07 RN-F power supply cable • Single phase version with float on request • Available in the 230V ±10% 50Hz three phase version
• Installation: in horizontal and vertical position

• Maximum working pressure: 10 bar • Maximum temperature of the liquid: 40°C • Maximum immersion: 20 m, (10 m with float) • 2 pole self-ventilated asynchronous motor cooled via the moving
liquid • Class of insulation F • IP68 Protection rating • 230V ±10%, 50Hz single phase voltage
400 ±10%, 50Hz three phase voltage • Permanent capacitor inserted and
thermo-amperometric protection with automatic reset incorporated
for the single phase motor • Protection under user's responsibility for the three phase version • G11⁄4 discharge connection

• External casing, motor cover, seal housing disc, filter and closing ring in AISI 304
• Impeller, nozzle and spacer in PPO reinforced with fibreglass • Shaft in AISI 431 • Upper mechanical seal (motor side) in Carbon/Ceramic/NBR and lower
(pump side) in SiC/Carbon/NBR

• 1EPBH (see page 43)

ACCESSORIES (on request)
• 5 litre 10 bar 3⁄4 EPDM vessel • 24 litre 8 bar 1” EPDM vessel • 24 litre 10 bar 1” EPDM vessel • PVC 5m key float with counter-weight • PVC 10m key float with counter-weight • SQUARE-D FSG-2 1.4÷4.6 bar G1⁄4 F pressure switch • FYG-22 2.8÷7 bar G1⁄4 F pressure switch • Presscomfort - Pressure regulator (see page 45) • Press•o•Matic - Variable speed control system
(single phase 230V±10% power supply - three phase 220V output – maximum motor power 2.2 kW - 3 HP - see page 46) for IDROGO three phase 230V ±10%, 50Hz
• IDROGO discharge hydraulic kit (manifold, valves, pressure switches, pressure gauge) set-up for autoclave
• IDROGO TWIN discharge hydraulic kit (manifold, valves, manometer) set-up for functioning with TWIN inverter control panel (see page 44) and with IDROGO three phase 230V ±10%, 50Hz electric pumps.

Mua hàng

Sản phẩm mới

EVM - EVMG Series
CDX Series
TK-TR Series

Đối tác - Khách hàng